Email:[email protected]
Tel:
(562)
456-0507
805
Sentous
Ave,
City
of
Industry,
CA
91748
US
www.hykolity.com
The Installation must be carried out by a qualified electrician.
Installation
1.Installation parts display.
3.The wire pass through EVA pad, and use spiral
connector connect the junction box wire.
4.Lamp body is aligned with the hole on the
bracket of the junction box, and use screw fixed in
the middle of the bottom box.
5.Plug the hole with a rubber plug, waterproof and
dust proof.
6.refer to the picture below: relax the screws A an
d B, Adjust the heads of the lights to the direction
you want. and then tight the screws.
2.Mounting bracket to wall connection box.
