EN © 2021 HYKKER
All Rights Reserved
Digital camera for kids
14
To charge your device, connect the microUSB plug of the supplied cable to the charging
socket (12) on your device. Connect the other end of the cable to a powered USB adapter
or, for example, a powerbank. (none of these power supply devices are included), which
guarantee a power supply of 5 V
⎓
0.5 A or higher at the output. When charging starts,
the LED diode (6) lights up red and blue. When charging is complete, the red status LED
turns off. Disconnect power cable from the device and from the power source.
Connecting the switched-on camera to a USB port on a computer activates the data
transmission mode, during which normal use of the device is not possible. Once
disconnected from a computer the device will switch on.
4.2 Switching on/off, memory card installation
Press and hold the ON/OFF button (7) for approx. 3 seconds to switch the device on or
off. When the camera is switched on, the status LED (6) lights up blue and the main menu
starts.
In case the device gets blocked (no response to pressing buttons, etc.), it is possible to
switch it off in an emergency. To do this, insert a thin, elongated object (e.g. a pin) into the
opening of the emergency stop button (14). The camera will switch off instantly.
The main menu of the device
The icons:
A)
Taking pictures
B)
Video recording
C)
Viewing photos and video
D)
Settings
E)
Games
F)
Music playback
Use the up (8), down (11), left (10)and right (9) buttons to navigate the main menu. The
shutter button is responsible for selecting the currently selected item. The ON/OFF
button returns to the main menu from the currently selected operating mode.
The camera supports memory cards up to 32GB.
A
memory card must be installed in the device to be able to record videos and take
pictures
Insert the microSD memory card into the memory card slot (13) with the gold contacts
facing the back of the device), pressing until you hear a click.
To remove the card, lightly press it into the slot and the memory card slot mechanism will
eject the card allowing it to be removed.
If the memory card has not been formatted before, format it using the corresponding
option in the settings menu (chapter 4.3). Please note that formatting memory cards
erases all data from them!
A
B
C
D
E
F
