HYKKER 200384-KR-SL, Руководство пользователя

Страница: 25 / 32

25
•
When the device is not used, always remove the batteries. This will prevent
damage to the device in the event that electrolyte leaks from the batteries.
• Remove spent batteries from the device immediately.
•
Electrolyte may leak out of spent batteries, causing damage to the device.
• If any acid from the battery comes into contact with your hands, rinse them
under running water. If any acid gets into your eyes, contact a doctor. The acid
contained in the battery may cause irritation or burns.
•
Swallowing a battery may have fatal consequences! Keep batteries
away from children and pets. Seek medical assistance immediately if a battery
is swallowed.
7.3 Setting the clock and alarm
Setting the clock and alarm
1 . In the time display: press and hold the function button (9). The time format
appears in the display. Press the button (2) and information about the 24h or
12h hour display mode will be displayed. Change the setting with the „Up” (6)
or „Down” (8) button;
2 . Pressing the function button (2) again will take you to the time setting. The clock
symbol appears in the display. Set the clock with the „Up” (6) or „Down” (8)
buttons;
3 . The device will go into alarm setting. The alarm clock symbol appears on the
display. Set the alarm time using the Up (6) or Down (8) buttons;
4 . The device will enter the alarm sound setting. The display will show the word
„buzz” or „tuner” - radio, select the appropriate one with the buttons, up „(6)
or” down „(8);
5 . The device will enter the alarm volume setting mode. E.g. “V20” will be shown
on the display, select the correct volume using the “Up” (6) or “Down” button
(8), confirm using the button (2). The sound increases gradually to the selected
level .
CAUTION! If you stop entering the settings at any moment, the device will store the
changes automatically.
CAUTION! The minimum volume level for the radio is 07.
CAUTION! Once the device is connected to the mains, you may within 1 minute set the
alarm using the “Up” (6) or “Down” (8) button, confirm using the function button (2).