HygroMatik HC02Kit, Руководство пользователя

Страница: 8 / 62

Page 8
Accident Prevention Regulations
Attention: In the event of leaky or faulty components uncon-
trolled hot steam may flow.
HygroMatik steam humidifiers are IP20-protected. Make sure
that the unit is protected from drips in its installed location.
Installing a humidifier in a room without water discharge requires
safety devices to protect against water leakages.
Accident Prevention Regulations
Comply with the Accident Prevention Regulation Electrical Sys-
tems and Equipment to prevent injury to yourself and others.
Operation of the Unit:
Do not perform any work which compromises the safety of the
unit. Regularly check that all safety and monitoring devices are
functioning normally. Do not remove or disable safety devices.
Installation, Dismantling, Maintenance and Repair of the
Unit:
Disconnect unit components from power supply prior to mainte-
nance or repair work.
Attaching or installing additional components is permitted only
with the written consent of the manufacturer.
Electrical
Work on the electrical system must be performed by qualified
personnel.
Disconnect unit components from power supply prior to work.
It is not allowed to connect the unit to DC voltage supply.
In case of a malfunction in the electrical power supply, switch off
the unit immediately. Use only original fuses with the appropriate
amperage rating. Regularly check the unit's electrical equip-
ment. Promptly repair any damage, such as loose connections,
burned wiring or defective electrical insulation. After proper elec-
trical installation or repair, test all safety mechanisms (such as
grounding resistance).
2.3 Disposal after Dismantling
Note: The operator is responsible for the disposal of unit compo-
nents as required by law.