HygroMatik CU-1, Руководство пользователя

Страница: 45 / 56

Page 45
the nozzle cap with a piece of wood (a toothpick for
example).
» Clean the nozzle tip (3) with a lint free cloth.
» If necessary, replace the o-ring (2).
» Screw the nozzle cap back on and tighten by hand.
Note: For stubborn calcium deposits, you can soak the the
nozzle cap (1) for an hour in a normal solution of household
vinegar. After soaking, rinse the nozzle cap with clean water and
clean as above
9.5 Cleaning the Air Filter
Drain condensate from the air filter as needed. Atomisation can
become too coarse due to damp compressed air.
Air Filter, Type Skillair:
» "Turn the bleeder valve button to open, and if air pres-
sure is present, press upwards to drain condensate
from the air filter.
» "After draining, turn the bleeder valve button to close.
» "You will find additional information in the separate ope-
rating instructions for this component.
cleaning the air filter