hyfire HFW-STK-03, Руководство пользователя

Страница: 5 / 20

Survey setup
HFW - EM - 01 test expander
1. Place the HFW - EM - 01 test expander in the exact location of the installation site where you want to install a wireless system central or relay
node (i.e. HFW - W2W - 01 wire to wireless translator, HFW - EM - 01 wireless expander or a HFW - CEM - 02 wireless conventional system
expander module).
2. Connect the power supplier ’ s output to the HFW - EM - 01 ; the socket for the connector is located on the top side of the HFW - EM - 01 (picture
3. Connect the power supplier to the household mains line.
HFW - EM - 01 is now ready for use.
Alternatively, you can connect the HFW - EM - 01 test expander to a suita-
ble power supply battery through the battery connector cable (picture 3b).
Battery ’ s suggested specifications are given at the beginning of this manual.
1. Place the HFW - EM - 01 test expander in the exact location of the installation site where you want to install a wireless system central or relay
node (i.e. HFW - W2W - 01 wire to wireless translator, HFW - EM - 01 wireless expander or a HFW - CEM - 02 wireless conventional system expand-
er module).
2. Connect the red wire push - on terminal to the battery ’ s positive pole.
3. Connect the white wire ’ s push - on terminal to the battery ’ s negative pole.
4. Insert the battery connector ’ s jack plug into the HFW - EM - 01 power supply socket; this socket is located on the top side of the HFW - EM - 01 .
Survey detector
1. By rotating it clockwise, remove the survey detector from its
support base (picture 4).
2. Extract the battery cover from the bottom of the detector.
3. Insert both CR123A batteries into their detector ’ s housing (picture 5).
Batteries polarities must match the indicated polarity on the detector.
4. Wait until the LEDs at the top of the detector stop blinking.
5. Reinstall the detector ’ s battery cover.
6. Reinstall the detector on its base.
The survey detector is now ready for use.
Hyfire Wireless Fire Solutions Limited - Unit B12a, Holly Farm Business Park, Honiley,
Warwickshire, CV8 1NP - United Kingdom
www.hyfirewireless.com 5
Picture 3
Picture 4
Picture 5
Picture 3b