HYENA E-BIKE SYSTEMS
5
Mounting
Tool List
Phillips screwdriver
Accessory List
Battery discharge holder
1 set
Battery lock with key
1 set
Phillips screw (for bottom plate)
M3x0.5Px16mm
2 pcs
Phillips screw (for side plate)
M3x0.5Px10mm
6 pcs (2 pcs attached on the holder)
Mounting Instructions
• Use the proper bicycle tools during the installation or removal process.
• Carefully install this product is necessary, do not strike it with any tool such as a hammer or wrenches.
•
CAUTION
- Please strictly follow these steps for assembly; otherwise, an incorrect assembly may cause permanent
damage.
•
NOTE
- The bike image seen in the manual may be different from the actual bike, but will be enough to help you
understand related instructions. The battery and holder can be also installed upside down to suit different frame designs.
Battery Discharge Holder Installation
Step 1:
Insert the bottom plate of the holder.
Step 2:
Insert the side plate (non-discharge end).
Step 3:
Screw the side plate to the frame.
Step 4:
Screw the side plate to the bottom plate.
