HYENA E-BIKE SYSTEMS
13
Charging Instructions
• Check your battery pack before using it for the first time.
First, you must turn on the battery pack; if the charging
LED did not light up, it means that this battery pack might
be damaged.
•
Make sure to charge the battery pack fully before using it
for the first time.
• Do not try to use or charge damaged battery packs.
When charging, do not place any items 50 cm around the
battery, make sure the battery and the charger are on a
fireproof surface.
• Do not leave batteries in the charger for more than 24
hours, if the charging cannot complete in 24 hours,
contact your local bicycle dealer for assistance.
The battery pack can be charged under any power mode;
interrupting the charging process will not damage the
battery pack.
•
CAUTION
- The battery packs are partially charged
before they were shipped; in order to ensure that the
battery has full and sufficient power, please charge your
battery pack fully before using it for the first time.
Charging
• Plug the charger’s plug into an outlet (100-240V), using
the appropriate plug for the country’s standards.
• Uncover the charging socket on the battery, then
connect the charging plug with the charging socket on the
battery.
`
• When charging is complete, disconnect the charging
plug from the battery socket.
• Unplug the charger from the wall socket.
• Make sure to close the charging port cap after charging.
If foreign matter such as dirt or dust adheres to the
charging port, there is a risk that the charging plug will not
fit into the charging port.
• The type of socket for charge connector might be
different on the different type of batteries, please refer to
the battery instruction.
• If the battery has become completely empty, charge it as
soon as possible. If the battery is left uncharged, it may
cause the battery to deteriorate and become unusable.
•
CAUTION
- When possible, you should charge the
battery in an area with a smoke detector or make sure
someone is taking care of the battery during the charging
process.
•
CAUTION
- Do not place the battery charger at locations
that are easily accessible to children.
Charge the Battery Pack Before and After Storage
• When you do not use the battery pack of the e-bike for
extended periods of time, charging the battery to 30-60%
will be the optimum storage condition.
• Confirm the charge status again after six months; if the
remaining power of the battery pack is less than 30%,
charge it again to between 30-60%.
•
CAUTION
- If the battery is stored under the condition of
lacking power, the battery pack may be damaged and the
power storage capacity of the battery pack itself will also
be affected significantly.
