Importör HYDX – TyTera - WOUXUN
Svenska OH Gruppen – Anders Olsson –
– Tel. 070-598 80 50
HYDX D50 VHF DMR – WWW.TROLLEBORG.SE
11
screen
Launch And Receive Call
1) Zone Selection
Zones is a channel group .Each radio can set at most 250 zones and each zone with 16 channels (Maximum).
Operation as below
：
1.Press [OK] to enter the menu.
2. Press
[△/▽]
to choose
，
and [OK] to confirm.
3. Screen shows the chosen zone and named .
4. Press
[△/▽]
to chose
，
and[OK] to confirm.
5. Screen shows the chosen zone .
2)Selection Of Channels , User ID Or Group ID
Select desired zone ,rotate channel knob to select the desired channel, user name or ID ,group name
or ID
3)Receive And Reply Group Call
To receive group calling ,radio should be allocated under the group.
When receiving :
1.LED indicator lights green.
2. Show RSSI mark on the top screen
：
First line show the group name , income call ID are in the
meddle ,group call ICON will be the last (only digital mode )
3.Hold the radio and place it between your lip within 2.5~3cm .Active the alert tone when channel free.
You will hear the tone when release the PTT and waiting for your answer.
4.Press [PTT] to answer the call, LED indicator light change to red .
5.Release [PTT] to receive next call
6.If there are not any transmitter within the time limited , the call failed .
4)Receive And Reply The Single Call
Single call is one to one calling. Only two types
：
1)Radio self detect before calling ;2) Ready to call.
When receiving
：
1.LED indicator lights green.
2. Show RSSI mark on the top screen .First line show the single call ,user name or ID in the middle
，
single call mark at the end
（
Only analog mode
）
.
3. Hold the radio and place it between your lip within 2.5~3cm .Active the alert tone when channel free.
You will hear the tone when release the PTT and waiting for your answer.
4. Press [PTT] to answer the call.LED indicator change to red .
5. Release [PTT] to receive .
5)Receive All Call
All call means communicate with all members on the same channel and to public important information
When receiving
：
1. LED indicator lights green.
2. Show RSSI mark on the top screen .First line show the all call ,user name or ID in the middle
，
all call
mark at the end
（
Only analog mode
）
3. Back to previous interface after finishing all call .If under the
“free channel message
