USE WITH A MULTISYSTEM MEASUREMENT
INSTRUMENT
HySense
®
CX 197
40
ENG
Oil humidity:
If you select the “Oil humidity” element from the Condition menu, a window
opens (Figure 32), on which it is signaled with three indicators whether the
relative oil humidity is greater than 50%, 75% or greater than 95%.
Particle contamination:
The three indicators depicted in Figure 33 are used for particle analysis:
•
Particle contamination: This indicator turns red if a measurement value
exceeds the limit value set under Limits.
•
Meas. values existing: Here you can see whether measurement values
have been sent by the particle monitor or whether there is a
communication problem.
Figure 31
: Oil condition on the “Oil condition” menu
Figure 32
: Oil humidity on the “Oil condition” menu