manualshive.com logo in svg

Hydrotech 89DF Series, Руководство пользователя, Страница: 1 / 52

Поделиться
Скачать
Hydrotech 89DF Series Скачать руководство пользователя страница 1

Canada West

855 Park St., Unit 1

Regina, SK S4N 6M1

Canada East

490 Pinebush Rd., Unit 1

Cambridge, ON N1T 0A5

U.S.A.

56 Lightcap Rd.

Pottstown, PA 19464

9760 Mayflower Park Drive, 

Suite 110

Carmel, IN 46032

4655 McDowell Rd. W 

Phoenix, AZ 85035

IAPMO R & T Certified 
against CSA B483.1

IAPMO R & T Certified 
against NSF/ANSI 44

Owners Manual

89

UF/DF

 Series

*

  

 

Water Softener

1. 

Page 25 of this manual contains important maintenance procedures for the continued proper  

  operation of your unit. These MUST be performed regularly for your warranty to remain valid.

2.

 

Read all instructions carefully before operation.

3.

 

Avoid pinched o-rings during installation by applying NSF certified lubricant to all seals (provided with install kit).

4.

 

This system is not intended for treating water that is microbiologically unsafe or of unknown quality without  

  adequate disinfection before or after the system.

 

*Check the valve sticker 

to make sure its UF (Upflow) or  

DF (Downflow)

Содержание 89DF Series





















































Отзывы:

Нет отзывов