HYDROSCAND H120BASIC, Руководство пользователя

Страница: 13 / 29

Page 13
h120bASIc uSEr mAnuAL EdItIon II 2016-12-28
7. trouble shooting
Problem
Machine starts but cylinder will
not move:
Low crimping force:
Inconsistent crimping
measurements:
Machine will not start:
1. Incorrect motor
rotation.
2. Low oil level.
3. Electrical/mechanical
failure.
1. Insufficient lubrication.
2. Low oil level.
3. Faulty pressure reliefe
valve.
4. Electrical/mechanical
failure.
5. Insufficient lubrication.
6. the machine need to
be recalibrated.
7. Electrical/mechanical
failure.
1. no power.
2. Em-stop no reset
3. Motor protection has been
tripped.
change direction of motor rota-
tion.
Add oil.
Service is required,
contact hydroscand
machine Ab.
Lubricate.
Add oil.
Check hydraulic pressure. Adjust
or change valve.
Service is required,
contact hydroscand
machine Ab.
Lubricate.
Perform calibration.
Service is required,
contact hydroscand
machine Ab.
connect, check fuses.
Press reset button.
check motor protection.
Reason Solution