Hydronix Hydro-MIX XT Skid, Руководство по установке

Страница: 18 / 25

Mechanical Installation Chapter 2
18 Hydro-Mix XT Skid Installation Guide HD0927 Rev: 1.0.0
3.4
Installing the Hydro-Mix XT Skid on an Angled Conveyor Belt
The Hydro-Mix XT Skid can be installed on a conveyor belt that is running at an angle. It is
recommended that the Hydro-Mix XT Skid is only operated at a maximum of 30°.
30°
30°
Figure 10: Angled Conveyor Installation
4 Improving the Material Flow
4.1
Diverters
Maintaining a minimum material depth on the conveyor belt is vital to ensure that the sensor is
in contact with the material and to remove the possibility of conveyor belt interference.
Adjustments to the flow will be required if the minimum depth is not achievable. Installation of
diverters to restrict the flow, and as a result increase the depth, can be used to maintain the
correct material flow. (Figure 11)
Material on
conveyor
Diverters
Hydro-Mix XT Skid
Diverters
>50mm
Figure 11: Material Depth Increased Using Diverters