HydroMatik HeaterCompact, Руководство пользователя

Страница: 32 / 78

Page 32
5.8 Condensate Hose
Note:
When inst alling the conden sate hose, please pay atten-
tion to the following:
Warning: To ke ep cond ensate from accumula ting in the duct,
make sure condensate can drain freely.
If the s team m anifold i s positio ned hig her than 5 00 mm
above the steam humidifier:
» Remove the condensate plug (12) from the connection
fitting on the cylinde.
» Lay the condensate hose at an approximate incline of
5-10% to the steam cylinder connection fitting, to allow
the condensate to drain freely.
Note: It is recommended to form a loop of 200 mm diameter as
a vapour trap provided there is enough space. Possible operat-
ing noises can be re duced in t his manner. The loop should be
filled with water before commissioning.
If the ste am ma nifold is position ed lower than 5 00 mm
above the steam humidifier:
» The condensate must be drained separately.
» To prevent steam loss, lay a loop at least 200 mm in di-
ameter. The loop should be filled with water before
commissioning.
» To ensure condensate drainage, place the loop (vapor
trap) as far away as possible below the steam manifold
connection.
» The condensate connection on the steam cylinder must
be closed with a sealing cap.
» Place hose clamps at intervals of at least 500 mm, de-
pending on how the hose is laid.
5.9 Types of Installation
If the s team m anifold i s positio ned hig her than 5 00 mm
above the steam humidifier:
» Lay the steam hose at a height of at least 400 mm
above unit and then connect to the steam manifold with
a constant rise or fall.
» Lay condensate hose with a slope to the steam cylin-
der.