HydroLogic Hydroid, Руководство пользователя

Страница: 19 / 38

Hydroid
– Series User Manual
19 04/19
MEMBRANE INSTALLATION, REMOVAL AND REPLACEMENT
Installation and replacing membranes are an easy process if you have the proper information
at hand. Please refer to the following instructions when removing and replacing membrane
elements:
ALL PRESSURE GAUGES MUST READ ZERO BEFORE PROCEEDING.
BEFORE ATTEMPTING, DISCONNECT THE POWER FROM THE SYSTEM
AND BLEED ALL WATER PRESSURE FROM THE SYSTEM.
1) Perform this procedure one housing at a time to preserve the correct connections as
you replace the membranes (To remove Membrane 1, Carbon pre-filter must be
removed first).
2) Select the housing to be replaced.
3) Disconnect the fittings from the housing by simultaneously:
a) Pushing the grey collar toward the housing.
b) Pulling the tube from the collar.
4) Remove the screw from the clamp and twist the top clamp to un-hook the clamp.
5) Install new housing and re-connect tubing.
6) To start-up the system, please refer to the System Purging/Initial Start-Up (pages 15-
17)
section of this User’s Manual.
THE MEMBRANES MUST BE FLUSHED FOR AT LEAST 30 MINUTES.
DISCARD ALL OF THE PRODUCT (PURIFIED WATER) THAT IS PRODUCED
DURING THE FLUSH PERIOD.