Quick
Start Guide
Included Components:
1.
3 filter housings with o-rings
2.
Manifold
3.
Support leg/housing wrench
4.
KDF/Carbon Pre-Filter
5.
2 Reverse Osmosis membranes
6.
6 feet of inlet tubing - 1/2" white
7.
10 feet of pure water tubing - 3/8" blue
8.
10 feet of waste water tubing - 3/8" black
9.
Pressure gauge assembly - liquid filled
10.
Inline shut off valve - 3/8"
11.
6 packets of silicone lube
12.
4 membrane o-rings
13.
Garden hose inlet fitting - 1/2"
14.
4 elbow connector fittings
15.
Lock bar for elbow connector fittings
16.
Large manual (not pictured)
17.
Quick Start guide (you are reading it)
Orange 1:1 ratio elbow connector fitting
Options:
A wide variety of options and accessories available. Inquire at your
dealer or visit
www.hydrologicsystems.com
for more information.
Pre-Evolution
TM
Adds 2 extra stages of pre-filtration.
Pleated, cleanable sediment filter and
KDF85/55 Catalytic carbon filter.
Recommended when using more than
150 gallons per week average.
HL#31027
High-Flow
De-Ionization
Post Filter
Delivers 000 PPM water. Removes
last bit of Total Dissolved Solids.
HL#33006
UV Sterilizer Kit
Kills 100% of all bacteria and
viruses. Ensures the safest water.
HL#35010
Leak Detector &
Shut Off Valve - 1/2”
If there is a leak anywhere in the
system and water reaches the pad on
the bottom of the leak protector the valve
shuts off all incoming water preventing
further damage from the leak.
HL#28002
Booster Pump
Necessary for low inlet pressure situations.
Heavy duty, commercial booster
pump designed for continuous use.
Includes integrated low pressure
and high pressure switches. Boosts
pressure to optimal performance level.
HL#29014
Flowmaster - 3/8”
Gallon meter and filter capacity
monitor. Indicates when to change
your pre-filter(s).
HL#19020
TDS Pro Monitor
Measure PPM of dirty water going in
and pure water going out. Monitors
performance of your membranes.
HL#28010
Float V
alve - 3/8”
Fill any tank or reservoir unattended.
Adjustable water level.
NEVER FLOOD YOUR GARDEN AGAIN!
HL#27020
For inlet pressure over 80 psi.
Reduces excess pressure to be within
the operating parameters of the
Evolution-RO1000. Adjustable psi.
HL#26020
Stainless steel, heavy duty. Customized
for the Evolution-RO1000.
HL#10057
Pressure Regulator 1/2”
Wall Mount Bracket
1
14
15
13
12
18
11
9
10
5
4
3
2
6
7
8
R
R
18.
