HydroHoist Triton UltraLift, Руководство пользователя

Страница: 5 / 9

5
Set Boarding Height Timer allows you to lower the vessel to a set height off the water
to load or unload your vessel while the lift holds the vessel from floating away
Important: This feature MUST be set or used from the fully raised position with ONLY
the boat on the hoist.
•
Instructions to set Boarding Height Timer: Press LOWER and wait until the vessel
reaches the desired boarding height. Once the desired boarding height is reached,
press and hold
LOWER button for 3 seconds.
•
Power LED will flash GREEN 3 times indicating the boarding height timer is set.
•
To activate Boarding Height Mode: Press and hold LOWER for 3 seconds.
Remember, this feature MUST start from the fully raised position. The Power LED
will turn solid BLUE indicating you are in Boarding Height Mode. It will run the
amount of time set from the above step and then return to STOP Mode. You can
also press STOP at anytime to cancel boarding height.
Clear Boarding Height Timer
Important: To set a new Boarding Height Timer you must first clear the old timer.
•
Press and Hold the LOWER and STOP buttons together for 3 seconds
•
Power LED will flash GREEN 3 times indicating it has been cleared
Set Raise Timer allows you to set a less amount of time for RAISE MODE other than the
default 10 minutes. Ideal feature for solar or battery option to save power
Important: This feature MUST be set when the lift is completely lowered
•
To set: Press RAISE then wait until the vessel is completely up and all tanks are
bubbling and allow it to run an additional 30 seconds
•
Then Press and Hold the RAISE button for 3 seconds
•
Power LED will flash 3 times GREEN indicating the Raise Timer is set
Clear Raise Height Timer
Important: To set a new Raise Height Timer you must first clear the old one
•
Press and Hold the RAISE and STOP buttons together for 3 seconds
•
Power LED will flash GREEN 3 times indicating the timer has been cleared
Advanced Functionality of the Control