www.hydrofarm.com
4
INSTRUCTIONS
GETTING STARTED
The Hydroponic LED Growth Chamber includes a starter tray, insert, dome, natural grow sponges,
foam plant sponges, and a spray bottle to aid in seed germination. It’s important to keep seeds in a
warm humid environment for successful germination.
GROWING WITH NATURAL GROW SPONGES:
• Place the natural grow sponges into the black plastic grow insert.
• Place one seed in each natural grow sponge.
• Place the complete grow insert including sponges and seed into the 15” x 7” starter tray.
• Mist the sponges with the included spray bottle and place the dome onto the starter tray.
• Keep the seeds warm and moist until they germinate.
• When roots are visible transplant the sponges into LED Growth Chamber.
GROWING WITH FOAM SPONGES:
• Take one sheet of foam sponges and place into the starter tray.
• Add water and press the sponge until it fully absorbs the water.
• Place seeds into the center of each cube.
• Position seeds about 1mm-2mm inside of the sponge
• Place the dome onto the starter tray.
• Keep the seeds warm and moist until they germinate.
• When roots are visible transplant the sponges into LED Growth Chamber
TIPS FOR SUCCESSFUL GROWING
• Place the product on a table that will hold 100 lbs. securely
• Plug the cord into an electrical outlet.
• Place Air Stone on the end of clear air tube in the Water Reservoir.
• Fill Water Reservoir up to “water level” line.
• Place Styrofoam Board into the Growth Chamber on top of the water.
• Transplant seedlings into the Styrofoam board when roots are visible.
• Add sample nutrients according to the instructions listed on the bottles.
• Always keep water at “water level” marked in the reservoir.
• Use the spray bottle to keep plant moist.
• Use a fan for air circulation.
* WARNING - Temperature higher than 90°F or lower than 47°F will cause
death of plant.
