- 3 -
O2 Hydro SM
20170222
Connection Instructions
1.
Installation must comply with any existing state or local plumbing codes.
2.
Turn off your water supply. Turn off power to well. Turn off your water heater.
3.
Release water pressure by opening a nearby faucet.
4.
Attach water source to the male adapter on the
inlet
side of the by-pass valve. If existing inlet pipe size is smaller
or greater than 1”, you will need an additional adapter.
5.
Attach the outgoing water line to the male adapter on the
outlet
of the Bypass.
6.
Connect to the filter housing provided. Recommend a shut off valve be installed for future filter changes. The
outlet side of the filter housing is connected to the water line in to the house.
7.
Turn Bypass valve with the arrow pointing to “
SERVICE
”
(Figure 4)
8.
Turn on the power to the well then turn on hot water heater.
9.
Plug in Main Control Head into wall outlet. Use the Surge Protector.
10.
Set time of day on Main Control Head. Refer to
PAGE 4
of Owner’s Manual for instructions.
11.
Turn
your water on to allow water to slowly fill the volume in the Media Tank.
12.
After tank is full press the
Extra Cycle
button on the Main Control Head and hold for 5 seconds to enter “BACK-
WASH”. You will see water appear in the drain line
13.
Continue to backwash the media until the water in the drain line runs clear. This can take (60) minutes or more.
Troubleshooting Guide
■ If water leaks at fittings: Tighten slightly more until leak stops.
■
Note: This tank has an easy service port on the top that will allow you if needed, to add regeneration material
to the media that can help solve service issues if they arise.
Note: Fill out the enclosed Warranty Card and mail. Manufacturer Warranty is 5 years on parts. Your serial number is located
on the underside of the Main Control Head. Make appropriate entries on the Maintenance Card provided (ie. date installed and
dates medias are changed). Keep attached to the system and update when needed.
The HydroCare Service Department can be reached Monday – Friday, from 9am – 4pm PST at 888-963-6178 or at
www.hqhometek.com/solutions/water-solutions
.
