hydroblu Jerry Can Water Filter, Руководство пользователя

Страница: 4 / 8

When using the HydroBlu Jerry Can for the first time, make sure that the water outlet cap is
tightened and the water outlet valve is open. The Hollow fiber UF filter will come pre-installed.
Do not use this filter system to filter beverages, soft drinks and other liquids. Doing so can cause
irreversible damage to the filter system.
Do not attempt to use this product for seawater or high salinated water sources.
Do not drop or puncture the filter container. This can damage the filter and cause it not to work.
Do not use chemical detergents to clean the filter cartridge(s).
If it is determined that the ultrafiltration membrane is damaged, please replace the filter element in
time to ensure that the filtration system can be used properly.
1
2
3
4
5
Warning
06 07
3. Use the piston pump to pump
air into the Jerry Can until water
flows out.
4. Allow water to flow naturally
(do not drink).
1. Unscrew the pump cover cap,
fill by other water containers or
directly from the water sources.
2. Allow 5 minutes for the
filter element to fully soak.
5min
5. Repeat steps 3 and 4, repeating
two times, to ensure the system
is working and to flush any
manufacturing residue.
Open outlet
valve
Close valve to
stop flow of water
Unscrew cap
and fill water
1
Pull and push the
handle bar several
times
3
5 4
Screw on the
pump cap
2
First Use
A
Normal Use (water filling - pressurization - drinking)
B
HydroBlu Jerry Can User Manual HydroBlu Jerry Can User Manual