Hydro EvoWash, Руководство пользователя, Страница: 5 / 33

5
1.OO overview
1.O1 Package Contents
1) EvoWash Dispenser
(P/N varies by model, see table on page 6)
3) Accessory Kit (NA P/N HYD10099378, Global P/N HYD10099406 )
(Pickup Tubing, Detergent Injection Fitting, Conductivity Probe)
2) Mounting Kit (P/N HYD90097975)
(Wall Anchors, Screws, Wire Ties and Washers)
4) Rinse Pump Accessory Kit (only w/Rinse Pump) (P/N HYD90098478)
(Pickup Tubing, Wire Ties, Rinse Injection Fitting, Foot Valve & Weight)
1.O3 Product Features
• Optional, integrated rinse pump, or retrofit option.
• Simple, three button programming of integrated controller.
• Rinse Saver feature prevents wasteful rinse additive dosing during water fills.
• Detergent conductivity measurement and adjustable control settings to minimize overuse of detergent.
• Rack counter feature is standard.
• De-scale mode allows for safe washer cleaning without wasting detergent.
• Rinse Delay option, to prevent wasting rinse aid with Door style machines.
• Manual Prime function for Rinse pump.
1.O2 Description (North America vs. Global]
The EvoWash is a powder or solid detergent dissolver for use with warewash machines, with an optional, integrated rinse
pump. The built-in programmable control unit promotes safe and economical use of warewash supplies, ensuring accurate,
automatic chemical dosage, only as needed. The North America models include a backflow prevention vacuum-breaker to
meet ASSE 1055 and a conduit connector for the power, detergent and rinse signal wires to meet UL requirements.
EvoWash
Global
with
Rinse
Pump
EvoWash
North
America
with
Rinse
Pump
x4 x4 x4 x2
Mounting Kit
x1 x1 x1
Accessory Kit
x1 x5 x1 x1 x1
Rinse Pump Accessory Kit
Safety Precautions
WARNING! Please read precautions thoroughly before operation. Meet all applicable local codes and regulations.
THANK YOU FOR YOUR INTEREST IN OUR PRODUCTS
Please use this equipment carefully and observe all warnings and cautions.
protective clothing and eyewear when dispensing chemicals or other materials or when working in the
vicinity of all chemicals, filling or emptying equipment, or changing metering tips.
observe safety and handling instructions of the chemical manufacturer.
direct discharge away from you or other persons or into approved containers.
dispense cleaners and chemicals in accordance with manufacturer’s instructions. Exercise CAUTION when
maintaining your equipment.
reassemble equipment according to instruction procedures. Be sure all components are firmly screwed or
latched into position.
equipment clean to maintain proper operation.
only to water tap outlets with 30 to 90 PSI (2 to 6 bar), water temperature 40°F to 140°F (5°C to 60°C).
if the unit is used to fill a sink, or the discharge hose can be placed into a sink. The unit must be mounted so
that the bottom of the cabinet is above the overflow rim of the sink
if the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
WEAR
ALWAYS
KEEP
NOTE
ATTACH