background image

PN-20-09208-00 F           © Hydro Systems Company, Inc. 2015           HydroSystemsCo.com          Toll Free: 1.800.543.7184        1

The Taurus CP-300 dispenses liquid chemicals with a high degree 

of accuracy and repeatability. A separately wired remote provides a 

convenient way to start the cycle. Simple mounting, setup, and low cost 

make it ideal for single-product applications.

Taurus CP-300

 Single Pump

!

WARNING 
ADVERTENCIA:

The CP-300 should be installed 

by a qualified technician only, in 

accordance with all applicable 

electrical and plumbing codes.

El equipo CP-300 debe ser 

instalado sólo por técnicos 

calificados y de acuerdo con 

todas las normas de plomería y 

eléctricas que apliquen.

Remote

Wall Mount Kit

P/N 13-08607-00

 

Wall-Mounted Transformer

(100-240 VAC)

P/N 10096229

 

This Quickstart Guide

P/N 20-09208-00

General Specifications 

Feature  

Range

Pump delay time 

0 – 30 min. (5 min. increments)

Pump run time 

0 – 20 min. (real time)

Pump lockout time 

0 – 30 min. (5 min. increments)

Pump rate   

Approx. 8 ounces / minute

Wall-mounted transformer 

24 VDC, 1 A

Hardwired remote with 2 buttons and 3 LEDs

Adhesive-backed 

Fasteners

P/N 36-06158-16025 

Taurus CP-300 Pump, Complete

P/N 00-08879-00, 

(Includes Cat 5e Cable)

Complete Package Contents

Содержание Taurus CP-300










Отзывы: