hydro-s 7024510, Инструкция по установке и эксплуатации

Страница: 5 / 20

-4-
Be sure to use the provided or specified parts for the installation work.
The use of defective parts could cause an injury due to possible fire, electric shocks, the unit
falling etc.
Perform the installation securely and please refer to the installation instructions.
Incorrect installation could cause an injury due to possible fire, electric shocks, the unit falling,
leakage of water etc.
Perform electrical work according to the installation manual and be sure to use a dedicated
section.
If the capacity of the power circuit is insufficient or there is an incomplete electrical circuit, it
could result in a fire or an electric shock.
The unit must always have an earthed connection.
If the power supply is not earthed, you may not connect the unit.
Never use an extension cable to connect the unit to the electric power supply.
If there is no suitable, earthed wall socket available, it should be installed by a recognized
professional electrician.
Do not move and repair the unit by yourself.
Before proceeding with any maintenance, service or repairing work, the product must be
isolated from the mains electrical supply. Only qualified personnel could carry out these tasks.
Improper movement or repairing the unit could lead to water leakage, electrical shock, injury
or fire.
CAUTION
Do not install the unit in a place where there is a chance of flammable gas leaks.
If there is a gas leak and gas accumulates in the area surrounding the unit, it could cause an
explosion.
Perform the drainage/piping work according to the installation instruction.
If there is a defect in the condensing water drainage or water pipes, water could be leaked from
the unit and household goods could get wet and be damaged.
Do not clean the unit when the power is switched on.
Always shut off the power when cleaning or servicing the unit. If not, it could cause an injury