Pro Mist 35 User Manual
www.HydroMistUSA.com
4
3.
Installation
The pump needs to be installed near an electrical and water
connection. Place the pump in a location where water leaks or
accumulation will not cause damage to nearby property or goods.
The purge hose discharges about ½ oz of water when the pump is
stopped, or in between the intermittent modes when the pump stops.
Connect the pump to a water supply with a hose rated for constant
pressure. Standard residential water pressure, generally between 40
and 60 PSI, is sufficient to supply the pump with enough water flow.
Regular garden hose may not be suitable to hold a constant pressure
over time, and can swell up and leak if left under pressure.
HydroMist has hoses available, made specifically for the permanent
connection of the misting pump to a standard garden hose bib.
Part Number Description
Hose, 5 feet w/ Garden Hose Connections
Hose, 10 feet w/ Garden Hose Connections
