Pro Mist 35 User Manual
www.HydroMistUSA.com
10
5.2
Storage
5.2.1
Please follow the steps below to drain water from the pump.
a.
Disconnect the water supply to the pump.
b.
Run the pump briefly with the ball valve open to expel any
water from the internal pump cavities. There may be some
intermittent spraying and drainage while the pump purges
water from itself.
c.
After water stops coming out of the pump outlet, turn the
pump off.
d.
Drain misting lines, pipes, and rings of standing water to
prevent cracking from freezing.
•
When the machine is not in use, please keep it indoors.
•
If exposed to rain, stop the machine, and immediately remove the plug
to avoid electric shock or leakage.
•
Use caution when disassembling high pressure hose, pipe, nozzles,
rings, and fittings. There may be pressure (up to 1000 psi) inside and
serious injury can occur.
•
Do not use this machine when temperature is below (0°C/32°F).
Running the pump with ice in the hoses or pump will cause damage to
the pump and can cause an over-pressure situation that may be
dangerous.
