TO REMOVE PUMP
A. Remove nylon tabs by tapping out from
inside of solution container compartment
B. Remove bottom plate to access pump.
Page 7
INTRODUCTION
The Multi-Sprayer replaces pump-up sprayers.
The Multi-Sprayer is a tough, compact and versatile electric
sprayer, equipped with a
SOLVENT COM
PATIBLE VI
TON
PUMP.
It was designed to be easily transported to the job
taking up limited space. On the job, its 20 foot electric cord
and 10 foot spray hose allow you to cover a large area from
each electric receptical.
TWO MODELS, THE M1
AND M2
Common features of the two models are:
•
Tough Polyethylene Case
•2 Gallon Quick Change Container Capability
•
115
Volt, 50 psi Pump (230
Volt
Available)
•20 Foot Electric Cord & 10 Foot Spray Hose
•Pump is Solvent Compatible,
Viton Seals
•Spray
Trigger Has
V
iton Seal; also QC
•One
Year
Warranty Parts and Labor
M1 FE
ATURES
•2 Foot
Wand with 8004 or 8005
V-jet Nozzle
•
Weight
11 Pounds Empty
M2 FE
ATURES
•2 Foot
Wand with 8004
T-Jet with a Check
Valve/
Strainer
•Extra 50015
T-Jet
Tip for Upholstery with a Check
Valve/Strainer
•
Weight 12 Pounds Empty
SAFETY PROCEDURES
•RISK OF EXPLOSION--DO NO
T SPR
AY COM
-
BUSTIBLE FLUIDS
•PLUG IN
TO
115-120 VO
LT 50/60 CYCLE
GROUNDED 3-PRONG RECEP
TACLE
Page 2
M1 WAND
KEY
1
2
3
PART#
H1/8DT-8004
SS20
AB110CA
DESCRIPTION
Female
Thread Brass V-Jet Nozzle
Threaded S.S. Wand Tube
Brass Hex Nipple, 1/4 Male/1/8 Female
M2 WANDS (WAC & WACS)
KEY
1A
2
2A
24
3
25
2
1B
24
2A
25
WAC
TPU8004SS
CP1325
CP1335
4193-A-10-50SS
SS20
BST-N1SS
WACS
CP1325
TPU50015
4193-A-20-50SS
CP1336
BST-N1
Complete Carpet Wand
SS T-Jet Nozzle
Brass Nozzle Cap
Brass Male Body
Strainer W/Check Valve (inside 2A)
Stainless Steel Wand Tube
SS Male Coupler
Complete Upholstry Wand
Brass Nozzle Cap
Brass T-Jet Nozzle
Strainer W/Check Valve (inside 2A)
Brass Male Body
BR Male Coupler
8004WAND
Complete M1 Wand, Parts 1, 2, 3
Carpet Wand -WAC
Upholstery Wand -WACS
(exploded)
Page 6
1
2
3
2 1B 24 2A 25
1A 2 2A 3 25
GETTING STARTED
Slant your 2 gallon container of solution into the Multi-
out, connect the male/female cap quick connect system.
Then push the container into the Multi-Sprayer. To remove
container, push the silver tab on the female quick connect tip
out of container and remove.
Plug in, turn on switch and squeeze trigger to spray.
IF YOU HAVE MODEL M2...
1. Remove the 2 foot carpet wand or the upholstery tip at the
quick connect.
2. Squeeze the trigger, allowing the liquid to advance to near
the trigger.
3. Re-connect the 2 foot carpet wand or upholstery tip and
starting, but stop drips after spraying.
MAINTENANCE
At the end of the work period a mild detergent solution, fol-
lowed by fresh water, should be sprayed to clean the pump
and hose. When switching between water based and solvent
case cleans easily with a mild detergent and retains its luster
with application of a plastic/vinyl product.
Your Multi-Sprayer carries a one year parts and labor war-
ranty. The date of manufacture is stamped on the serial
plate. Keep your receipt for exact date of ownership for
warranty purposes.
FREEZING CAN DAMAGE
the Multi-
Sprayer and is not covered by the warranty. Consult the
Chemical Guide available from your distributor or manufac
-
turer for chemical compatibility. Chemical damage to the
pump is not covered by the warranty.
GETTING STARTED
Page 3
m1-11-17.indd 2
10/1/2012 11:05:12 AM
TO REMOVE PUMP
A. Remove nylon tabs by tapping out from
inside of solution container compartment
B. Remove bottom plate to access pump.
Page 7
INTRODUCTION
The Multi-Sprayer replaces pump-up sprayers.
The Multi-Sprayer is a tough, compact and versatile electric
sprayer, equipped with a
SOLVENT COM
PATIBLE VI
TON
PUMP.
It was designed to be easily transported to the job
taking up limited space. On the job, its 20 foot electric cord
and 10 foot spray hose allow you to cover a large area from
each electric receptical.
TWO MODELS, THE M1
AND M2
Common features of the two models are:
•
Tough Polyethylene Case
•2 Gallon Quick Change Container Capability
•
115
Volt, 50 psi Pump (230
Volt
Available)
•20 Foot Electric Cord & 10 Foot Spray Hose
•Pump is Solvent Compatible,
Viton Seals
•Spray
Trigger Has
V
iton Seal; also QC
•One
Year
Warranty Parts and Labor
M1 FE
ATURES
•2 Foot
Wand with 8004
V-jet Nozzle
•
Weight
11 Pounds Empty
M2 FE
ATURES
•2 Foot
Wand with 8004
T-Jet with a Check
Valve/
Strainer
•Extra 50015
T-Jet
Tip for Upholstery with a Check
Valve/Strainer
•
Weight 12 Pounds Empty
SAFETY PROCEDURES
•RISK OF EXPLOSION--DO NO
T SPR
AY COM
-
BUSTIBLE FLUIDS
•PLUG IN
TO
115-120 VO
LT 50/60 CYCLE
GROUNDED 3-PRONG RECEP
TACLE
Page 2
M1 WAND
KEY
1
2
3
PART#
H1/8DT-8004
SS20
AB110CA
DESCRIPTION
Female
Thread Brass V-Jet Nozzle
Threaded S.S. Wand Tube
Brass Hex Nipple, 1/4 Male/1/8 Female
M2 WANDS (WAC & WACS)
KEY
1A
2
2A
24
3
25
2
1B
24
2A
25
WAC
TPU8004SS
CP1325
CP1335
4193-A-10-50SS
SS20
BST-N1SS
WACS
CP1325
TPU50015
4193-A-20-50SS
CP1336
BST-N1
Complete Carpet Wand
SS T-Jet Nozzle
Brass Nozzle Cap
Brass Male Body
Strainer W/Check Valve (inside 2A)
Stainless Steel Wand Tube
SS Male Coupler
Complete Upholstry Wand
Brass Nozzle Cap
Brass T-Jet Nozzle
Strainer W/Check Valve (inside 2A)
Brass Male Body
BR Male Coupler
8004WAND
Complete M1 Wand, Parts 1, 2, 3
Carpet Wand -WAC
Upholstery Wand -WACS
(exploded)
Page 6
1
2
3
2 1B 24 2A 25
1A 2 2A 3 25
GETTING STARTED
Slant your 2 gallon container of solution into the Multi-
out, connect the male/female cap quick connect system.
Then push the container into the Multi-Sprayer. To remove
container, push the silver tab on the female quick connect tip
out of container and remove.
Plug in, turn on switch and squeeze trigger to spray.
IF YOU HAVE MODEL M2...
1. Remove the 2 foot carpet wand or the upholstery tip at the
quick connect.
2. Squeeze the trigger, allowing the liquid to advance to near
the trigger.
3. Re-connect the 2 foot carpet wand or upholstery tip and
starting, but stop drips after spraying.
MAINTENANCE
At the end of the work period a mild detergent solution, fol-
lowed by fresh water, should be sprayed to clean the pump
and hose. When switching between water based and solvent
case cleans easily with a mild detergent and retains its luster
with application of a plastic/vinyl product.
Your Multi-Sprayer carries a one year parts and labor war-
ranty. The date of manufacture is stamped on the serial
plate. Keep your receipt for exact date of ownership for
warranty purposes.
FREEZING CAN DAMAGE
the Multi-
Sprayer and is not covered by the warranty. Consult the
Chemical Guide available from your distributor or manufac
-
turer for chemical compatibility. Chemical damage to the
pump is not covered by the warranty.
GETTING STARTED
Page 3
m1-11-17.indd 2
10/1/2012 11:05:12 AM
