Cartridge Replacement
1. Turn off the cold water shut-off valve to the filter system.
2. Place a bucket or pan under the filter system to catch any water drips.
3. Turn each cartridge clockwise until it releases. Gently pull each cartridge down to remove from the
system head. Discard the used cartridges.
4. Hold each cartridge with the label facing to the left slightly. The two nozzles on the top of each cartridge
should be toward the back of the cartridge. See diagram in
Step 6
.
5. Lift each cartridge straight up into the system head until the two nozzles seat into the ports and the two
extended flanges on top of cartridge are fully engaged into the system head.
6. Turn each cartridge counter-clockwise until it stops.
7. Turn on the cold water shut-off valve and the faucet for filtered water. Check for leaks. If there are
leaks, see
Step 7
.
8. To flush out any air and carbon fines (fine black powder), flush water through the faucet for filtered
water for approximately 15 minutes.
