HydraMaster Titan 575, Руководство пользователя и график технического обслуживания

Страница: 34 / 57

Titan 575 Owner’s Guide: 32
HIGH PRESSURE PUMP MAINTENANCE
Daily
Check the oil level and the condition of the oil. The oil level should be up to the center of
the sight glass on the side or rear of the pump or between the “MIN” and “MAX” lines on
the dipstick. The dipstick may be found by removing the oil cap.
Periodically
Change the oil after the initial 50 hours of operation and every 500 hours after that. It may
be necessary to replace the pump seals and check valves at 500 hours if the truckmount
has been running in high ambient temperatures.
Refer to the Pump Servicing Section in the following page for more information.
If the oil becomes discolored or contaminated one of the oil seals may be damaged.
Do not operate the pump if the crankcase oil has become contaminated. Do not
rotate the drive shaft without oil in the crankcase reservoir.
The pump should never be run dry. Running the pump dry will cause premature
wear on the seals, packing and plungers. Running the pump dry for a prolonged
period of time may cause damage that cannot be repaired and voids warranty.
Do not run the pump with frozen water in the manifold. If there is a risk of freezing,
freeze guard the truckmount. See the Freeze Guarding section of this Onwer’s
Guide.