HydraMaster RX20 NEXTGEN 120 VAC, Руководство пользователя, Страница: 15 / 57

3-1: Owner’s Manual
3 - Assembly Instructions
To prepare your RX20 for use, follow these instructions:
1. Remove the machine from the packaging. Inspect the machine carefully for any
damage that may have occurred during shipping.
2. Remove the solid shipping plug from the top of the gear box (see Figure 3-1).
3. Check the gear box lubricant level (see page 6-4 of this Owner’s Manual).
4. Insert the vented plug (provided) into the gear box in place of the solid shipping plug.
The solid shipping plug may be discarded.
5. Remove the protective wrapping material from the wheels.
6. Attach the cleaning head, or star, assembly to the base of the RX20 (see
Figure 3-1).
a. Lean the machine back and rest it on the handle.
b. Thread the star assembly (cleaning head) onto the exposed shaft in a
counterclockwise direction.
Be sure to remove the solid shipping plug from the top of the gear box and
replace it with the vented plug (P/N 000-106-014), provided, before operating the
machine (see Figure 3-1). Failure to follow these directions may result in damage
to the gear box and seal.
Your RX20 is now ready to operate.
Figure 3-1. Fully Assembled RX20
Head, or Star,
Assembly
Shipping Plug
Base