manualshive.com logo in svg

HydraMaster RX-20 700-041-006, Руководство пользователя, Страница: 15 / 52

Поделиться
Скачать
HydraMaster RX-20 700-041-006 Скачать руководство пользователя страница 15

3-1:  Assembly Instructions

RX-20

3 - Assembly Instructions

To prepare your RX-20 for use, follow these instructions: 

Remove  the  machine  from  the  packaging.  Inspect  the  machine  carefully  for  any 

1. 

damage that may have occurred during shipping.
Remove the solid shipping plug from the top of the gear box (see 

2. 

figure 3-1).

Check the gear box lubricant level (see page 

3. 

6-4 of this Owner’s Manual).

Insert the vented plug (provided) into the gear box in place of the solid shipping plug. 

4. 

The solid shipping plug may be discarded.
Remove the protective wrapping material from the wheels.

5. 

Attach  the  cleaning  head,  or  star,  assembly  to  the  base  of  the  RX-20  (see 

6. 

figure 3-1).

lean the machine back and rest it on the handle.

a. 

Thread  the  star  assembly  (cleaning  head)  onto  the  exposed  shaft  in  a 

b. 

counterclockwise direction.

be sure to remove the solid shipping plug from the top of the gear box and replace 
it with the vented plug (p/N 000-106-014), provided, before operating the machine 
(see figure 3-1). failure to follow these directions may result in damage to the 
gear box and seal.

your RX-20 is now ready to operate.

Figure 3-1.  

fully Assembled RX-20

Head, or Star, Assembly

Shipping Plug

Base

Содержание RX-20 700-041-006





















































Отзывы:

Нет отзывов