manualshive.com logo in svg

HydraMaster Diamond Products GTXR+, Руководство владельца и журналы технического обслуживания

Поделиться
Скачать
HydraMaster Diamond Products GTXR+ Скачать руководство пользователя страница 25

23:    Diamond Products GTXR+ - Owner’s Guide

250 Hours

•  Check coupler (rubber sleeve) for cracks or wear. Replace as necessary. Replace as 

necessary (Coupler Sleeve Part Number: 000-152-015). 

•  Check the engine valve clearance (intake and exhaust 0.004” - 0.006”)

500 Hours

•  Change the blower oil.
•  Change the high pressure pump oil.
•  Check the engine valve clearance (intake and exhaust 0.004” - 0.006”)
• 

Change the fuel filter.

•  Replace as necessary. Check coupler (rubber sleeve) for cracks or wear. Replace as 

necessary (Coupler Sleeve Part Number: 000-152-015).

• 

Replace the sacrificial anodes in the tank.

1000 Hours

• 

Change air filters.

•  Check plug wires. Replace as necessary.
•  Check carburetor. Clean or replace as necessary.
•  Clean the heat exchanger core.
•  Replace as necessary. Check coupler (rubber sleeve) for cracks or wear. Replace as 

necessary (Coupler Sleeve Part Number: 000-152-015).

Refer to the Interval Hours Maintenance chart on page 43 and page 44.

Содержание Diamond Products GTXR+


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды