HydraMaster Chem-Dry PowerHead, Руководство пользователя

Страница: 17 / 50

4-3: Operating Instructions
Harris Research, Inc
Chem-Dry
®
PowerHead
®
Once you have become familiar with the speed and movement
of the machine, practice making it hover in one spot. (The
hovering maneuver is useful for removing stubborn stains, as
well as removing furniture indentations.)
Do not tilt machine sideways while moving forward and
backward (see Figure 4-3). A loss of control may result in
damage to the unit or location.
EDGING TOOL
The edging tool is located on the front right-hand side of the
PowerHead.
1. To remove, pull the edging tool upward until the alignment
pin matches the large diameter of the key hole slot.
2. Pull the tool away from the PowerHead and it is ready to
use.
3. When attaching it back onto the machine, rest the end of the tool on the lower elbow
and slide the pin into the key hole slot.
4. Gently push the edging tool into the elbow until it is snug.
Figure 4-3. Incorrect
Use of the Machine