HydraMaster CDS 4.6 Скачать руководство пользователя страница 21

Страница: 21 / 126

2-1: Chemicals and Cleaning

2 - Chemicals and Cleaning

your mobile carpet cleaning plant has been engineered using the latest and most

sophisticated technology available to produce the finest carpet cleaning results possible.

Despite this, it remains only a tool of the carpet cleaning trade and can produce only as a

good a job as the person operating it.

This section of the manual contains the following information:

Cleaning Precautions

Cleaning Stroke Procedure

overwetting

The use of some chemicals through your mobile carpet cleaning plant can seriously

damage the internal plumbing, high-pressure pump, chemical pump and heat exchangers.

These harmful chemicals include concentrated acid, solvents (including d-limonene),

and some paint, oil and grease removers with a high concentration of solvents (see pH

chart in figure 2-1.

Figure 2-1. pH Chart

Содержание CDS 4.6































































































































Результаты поиска

Содержание CDS 4.6

Отзывы:

HydraMaster CDS 4.6, Руководство пользователя, Страница: 21 / 126

Результаты поиска

Содержание CDS 4.6

Отзывы: