HREI
Inst Issue 1: 09.05.16
3.7 If the heater is to be suspended, it is necessary to make sure of the
support's strength. The heater is equipped with 4 - M8 threaded inserts
on the top of the unit. Ensure the slings or suspension rods are suitable
to take the weight of the heater model safely. These moutings must be
perfectly aligned with the unit, as per following drawing:
Present 4 feet and secure with screws M8.
3.7 If the heater is to be placed on feet, refer to the drawing below:
WARNING
Support must be perfectly level, check the horizonal level
of the heater. Attach the feet to the ground to prevent it from being
moved unintentionally.
