Safety information
MRFD1
en(us)
Page 7 / 44
MoWa MRFD1 4113517a en-us 2016-08-10.docx
2016-08-10
Safety information
The filter was built according to the statutory provisions valid at the time of
delivery and satisfies current safety requirements.
Any residual hazards are indicated by safety information and instructions and
are described in the operating instructions.
Observe all safety and warning instructions attached to the filter. They must
always be complete and legible.
Do not operate the filter unless all the safety devices are present.
Secure the hazardous areas which may arise between the filter and other
equipment.
Maintain the unit inspection intervals prescribed by law.
Document the results in an inspection certificate and keep it until the next
inspection.
Hazard symbols
These symbols are listed for all safety information and instructions in these
operating instructions which indicate particular hazards to persons, property or
the environment.
Observe these instructions and act with particular caution in such cases.
Pass all safety information and instructions on to other users.
General hazard
Danger due to operating pressure
Risk of burns due to hot surfaces
