FT 5
General Safety Precautions
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 10 / 44
Bewa FT5 3160334d en-us 2012-03-14.doc
2012-03-14
Safety Devices
Prior to starting up the product each time, make sure that all the safety devices are
properly fitted to the hydraulic system in which the product is to be used and are in
proper working order.
When the product is supplied in partial consignments, the safety devices are to be
applied by the operator as specified by law/pertinent regulations.
Informal Safety Precautions
Always keep the operating instructions in the vicinity of the unit.
In addition to the operating instructions, the general and local regulations pertaining to
accident prevention and environmental protection are to be observed.
Make sure that the safety and hazard symbols and warnings on the unit are always in a
legible condition.
Check the hoses and connectors for leaks on a daily basis. Regularly check the
electrical equipment. Replace any loose connections or damaged cables immediately.
How to behave in case of emergency
In the event of an emergency, pull the power plug.
