Attaching the FMMP mechanically
FMM-O-M
en(us)
Page 19 / 32
MoWa FMM-O-M 3874983 en(us) 2013-09-16.doc
2013-09-16
Attaching the FMMP mechanically
We recommend installing the unit vertically, so that the flow direction is from
bottom to top. When selecting the installation site, check the ambient
conditions such as temperature, dust, water, etc. The CS features a
protection rating of IP 67 according to DIN 40.050 / EN60.529 / IEC 529 /
VDE 0470
The FMM can be mounted as follows:
Ⓐ
the two mounting holes in the installation block using 2x cylindrical
screws M6 x 55 mm according to ISO 4762
Ⓑ
the two mounting holes in the CS 1000 using 2x cylindrical screws
M8 x 50 mm according to ISO 4762
Ⓒ
the four threaded holes in the installation block using 4x M6 screws
90
50
35
90
83
A
C
B
Содержание FMM-O-M Series
Страница 31: ......