Hydac CSI-B-1, Руководство по эксплуатации

Страница: 19 / 36

CSI-B-1 Parameterizing CSI-B-1 with the HyperTerminal
Parameterizing CSI-B-1 with the HyperTerminal
You will require the standard software HyperTermainal to parameterize the CSI-B-1.
This program is part of the Window Standard Installation. You can find it in Windows
under:
Programs -> Accessories -> Communications -> HyperTerminal
New connection
Name:
Symbol:
CSI-B-1
OK Cancel
After the Start you will be prompted to give this connection a name (example: CSI-B-
1) and you can select a suitable symbol.
Connect with
Connect via:
Cancel
OK
Now select for the "Connect via" point the interface which you had determined
previously via DeviceManager (see page 18).
HYDAC FILTER SYSTEMS GMBH en(us) Page 19 / 36
BeWa CSI-B-1 3424452b 2012-04-20 en-us.doc 2012-04-20