FMMP
Decommissioning FMMP
HYDAC Filter Systems GmbH
en
Page 22 / 28
BeWa FMMP 3360764 en 2009-06-05.doc
2009-06-05
Decom i
For decommissioning,
following steps:
4.
Dispos
o
Dispo
n
es
and r
This
lie
oil, and to
tr
After
materials, reuse them or
ispose of them properly in accordance with local regulations.
Spare parts and accessories
Spare parts
m ssioning FMMP
proceed according to the
1.
2.
Remove the electric plug to the CS1000.
Depressurize the system.
3.
Remove the connected hoses/piping from the FMMP.
Remove the FMMP.
ing f the FMMP
se of the packaging material as appropriate for your area.
Whe decommissioning and/or disposing of the MCS, observe all local guidelin
egulations pertaining to occupational safety and environmental protection.
app s in particular to the oil in the unit, to components coated in
elec onic components.
disassembling the unit and separating the various
d
Description
Pc.
Part no.
Manifold block
1
*
Flow control valve
1
710353
ContaminationSensor CS 1000 (depending on the design)
1
*
Screws for securing the CS1000
4
603046
O-ring between CS1000 and manifold block
2
6003048
Test point type 1604
2
629477
Endplate for filter element
1
3331617
Filter element replacement kit, consisting of:
- 2x O-ring, 1x support ring, 1x filter element
1
3348645
* Available on request
