FluidMonitoring Module
Safety Information and Instructions
HYDAC FILTER SYSTEMS GMBH
en
Page 8 / 28
MoWa FMM-P-L 3493215 en 2010-03-09.doc
2010-03-09
Safety Information and Instructions
These operating instructions contain the key instructions for properly and safely
operating the FMM.
Obligations and Liability
The basic prerequisite for the safe and proper handling and operation of the FMM is
knowledge of the safety instructions and warnings.
These operating instructions in general, and the safety precautions in particular, are
to be adhered to by all those who work with the FMM.
Adherence is to be maintained to pertinent accident prevention regulations
applicable at the site where the product is used.
The safety precautions listed herein are limited solely to using the FMM.
The FMM has been designed and constructed in accordance with the current state
of the art and recognized safety regulations. Nevertheless, hazards may be posed to
the life and limb of the individual using the product or to third parties. Risk of
damage may be posed to the product or other equipment and property.
The FMM is only to be used as follows:
solely for its designated use
only when in a safe, perfect condition
Any faults or malfunctions which might impair safety are to be properly repaired or
remedied immediately.
Our General Terms and Conditions apply. They are provided to the owner upon
conclusion of purchase of the unit at the latest. Any and all warranty and liability
claims for personal injuries and damage to property shall be excluded in the event
they are attributable to one or more of the following causes:
improper use of the FMM or use deviating from its designated use
improper assembly, installation, commissioning, operation and maintenance of
the FMM
modifications to the FMM made by the user or purchaser
Improper monitoring of unit components that are subject to wear and tear
Improperly performed repair work
