HYDAC International FMM-O-M, Инструкция по установке и обслуживанию, Страница: 10 / 28

FluidMonitoring Module – FMM-O-M Safety Information and Instructions
Informal Safety Precautions
Always keep the operating instructions in the vicinity of the measurement unit.
Apart from the operating instructions, any and all general and local regulations
pertaining to accident prevention and environmental protection are to be made
available and observance is to be maintained to them.
Make sure to keep the safety and hazard symbols and warnings on the FMM in a
legible condition.
Check the hoses and connection fittings for leakage daily (visual check). The
electrical components of the FMM are to also be regularly checked (visual check
once a month). Replace any loose connections or damaged cables immediately.
WARNING
Hydraulic systems are under pressure
Danger of bodily injury
► The hydraulic system must be depressurized
before performing any work on the hydraulic
system
Safety Measures to Be Followed during Normal Operation
Do not operate the FMM unless all the safety devices function properly.
The product is to be checked once a day for external damage and the proper
functioning of the safety devices.
Modifications to the FMM
Do not make any modifications (design modifications, extensions) to the FMM
without the prior consent of the manufacturer.
Any modifications require written permission from HYDAC Filter Systems GmbH
Immediately replace any machine components which are not in perfect condition.
HYDAC FILTER SYSTEMS GMBH en(us) Page 10 / 28
MoWa FMM-O-M 3492448a en-us 2010-12-15.doc 2010-12-15
Use only original spare parts.