3
EN 7.407.1.E1/08.17
4. MAINTENANCE INSTRUCTIONS
4.1 USER INSTRUCTIONS FOR
FILTERS
Notice
It is the responsibility of the
owner to comply with the
water regulations of the
country concerned.
Caution
Statutory accident prevention
regulations, safety
regulations and safety data
sheets for fluids must be
observed.
Caution
When working on, or in the
vicinity of, hydraulic
systems, naked flames, spark
generation and smoking are
forbidden.
Caution
Hydraulic oils and water-
polluting fluids must not be
allowed to enter the soil or
watercourses or sewer
systems. Please ensure safe
and environmentally friendly disposal
of hydraulic oils. The relevant
regulations in the country concerned
with regard to ground water pollution,
used oil and waste must be complied
with.
Caution
The maximum storage
duration of BDE filters/BDE
cartridges is 2 years!
The following conditions
must be provided by the
customer:
- dry storage
- cool storage (
≤
40 °C)
- protection from UV exposure
Not suitable for cleaning with
high-pressure cleaner!
NOTE
The information in this brochure
relates to the operating conditions and
applications described.
For applications and operating
conditions not described, please contact
the relevant technical department.
Subject to technical modifications.
3.2 ERSATZTEILLISTE BDE
Item Description
BDE
1.
Cartridge
BDE 200 X 2 W 0.0
01299653
BDE 400 X 2 W 0.0
01299654
BDE 1000 X 2 W 0.0
01299655
2.
Bottom section
Bottom section E BDE G 1.0
(G 1'')
01301705
Bottom section E BDE N 1.0
(NPT 1'')
01301703
Bottom section E BDE N 2.0
(NPT 2'')
01301704
Bottom section E BDE M 1.0
(M42x2)
01305475
Bottom section E BDE S 1.0
(Slip Fit 1'')
01305476
Bottom section E BDE F 1.0
(Flange)
01305477
Bottom section E BDE G 1.0 /-RV0.003)
(G 1'')
01301708
Bottom section E BDE N 1.0 /-RV0.003)
(NPT 1'')
01301706
Bottom section E BDE N 2.0 /-RV0.003)
(NPT 2'')
01301707
Bottom section E BDE M 1.0 /-RV0.003)
(M42x2)
01305478
Bottom section E BDE S 1.0 /-RV0.003)
(Slip Fit 1'')
01305479
Bottom section E BDE F 1.0 /-RV0.003)
(Flange)
01305480
Bottom section E BDE G 1.0 /-RV0.02)
(G 1'')
01305481
Bottom section E BDE N 1.0 /-RV0.02)
(NPT 1'')
01305482
Bottom section E BDE N 2.0 /-RV0.02)
(NPT 2'')
01305483
Bottom section E BDE M 1.0 /-RV0.02)
(M42x2)
01305484
Bottom section E BDE S 1.0 /-RV0.02)
(Slip Fit 1'')
01305485
Bottom section E BDE F 1.0 /-RV0.02)
(Flange)
01305486
Other spare parts on request
4.2 MAINTENANCE, GENERAL
This section describes maintenance
work which must be carried out
periodically. The operational safety
and life expectancy of the filter, and
whether it is ready for use, depend to
a large extent on regular and careful
maintenance.
4.3 MAINTENANCE MEASURES
z
Spare parts must fulfil the technical
requirements specified by the
manufacturer.
z
This is always guaranteed for original
HYDAC spare parts.
z
Tools, working area and equipment
are to be kept clean.
z
After disassembling the filter,
clean all parts, check for damage or
wear and replace parts if necessary.
z
When changing a filter element,
a high level of cleanliness must be
observed!
4.4 INTERVAL BETWEEN ELEMENT
CHANGES
When the filter is due to be changed,
the colour changes reliably from red to
light orange.
Customer Information in respect of
Machinery Directive 2006/42/EC
Hydraulic filters are fluid power parts/
components and are therefore excluded
from the scope of the Machinery Directive.
They do not bear the CE mark.
Before using these components, ensure
compliance with the specifications
provided by HYDAC Filtertechnik GmbH in
this documentation.
The specifications also contain information
on the relevant essential health and
safety requirements (based on Machinery
Directive 2006/42/EC) that are to be
applied by the user.
We hereby declare that the filters are
intended to be incorporated into machinery
within the terms of the Machinery Directive
2006/42/EC.
It is prohibited to put the filters into
service until the machinery as a whole is
in conformity with the provisions of the
Machinery Directive. Furthermore, our
Terms of Sale and Delivery are available
on our website (www.hydac.com).
SERVICE ADDRESSES
HYDAC Service GmbH
Postfach 1251
66273 Sulzbach / Saar, Germany
Factory address:
Werk 13
Friedrichsthaler Str. 15
66540 Neunkirchen / Heinitz
Germany
ServiCenter:
Tel.: +49 (0) 6897 / 509-9083
Fax: +49 (0) 6897 / 509-9881
Customer service:
Tel: +49 (0) 6897 / 509-412
Fax: +49 (0) 6897 / 509-828
