HYDAC International 0F5C20P6N2B05C, Инструкция по эксплуатации и техническому обслуживанию

Страница: 8 / 32

Filtromat – OF5 C
1 Safety information and instructions
These operating instructions contain the key instructions for properly and safely
operating the Filtromat OF5 C.
The safety of the Filtromat OF5 C largely depends on maintenance. Regular
required maintenance is described in this manual. We will support you if the unit
needs repair and will provide original spare parts.
1.1 Obligations and Liability
The basic prerequisite for the safe and proper handling and operation of the OF5 C
is knowledge of the safety instructions and warnings.
These operating instructions, and the safety guidelines in particular, are to be
observed by all those who work with the Filtromat.
Additionally, all local accident prevention instructions and regulations must be
observed.
The safety precautions listed herein are limited solely to using the Filtromat.
The Filtromat has been designed and constructed in accordance with the technical
state of the art and recognized safety rules and regulations. Nevertheless, hazard
may be posed to the life and limb of the individual using the product or to third
parties. The Filtromat is to be used
•
solely for its designated use
•
only in accordance with the designated equipment group, equipment category
and zone indicated above
•
only when in a safe, perfect condition
Any faults or malfunctions which might impair safety are to be properly repaired or
remedied immediately.
Our General Terms and Conditions apply. They are made available to the owner
upon concluding purchase of the unit at the latest. Any and all warranty and liability
claims for personal injuries and damage to property shall be excluded in the event
they are attributable to one or more of the following causes:
•
improper use of the Filtromat or use deviating from its intended use
•
improper assembly, installation, commissioning, operation and maintenance of
the Filtromat
•
operating the Filtromat when the system equipment or systems are defective
•
unauthorized modifications to the Filtromat made by the user or purchaser
•
improper monitoring of unit components that are subject to wear and tear
•
improperly performed repair work
HYDAC Filtertechnik GmbH
en
Page 8
BeWa OF5C 3160333a en 2008-02-06