MultiRheo Filter - MRFD3
Safety information and instructions
HYDAC FILTER SYSTEMS GMBH
en(us)
Page 8 / 40
BeWa MRFD3 3217120b en-us 2012-03-07.doc
2012-03-07
Safety information and instructions
These operating instructions contain the key instructions for properly and safely
operating the MRF.
Obligations and liability
The basic prerequisite for the safe and proper handling and operation of the MRF is
knowledge of the safety instructions and warnings.
These operating instructions in general, and the safety precautions in particular, are
to be adhered by all those who work with the MRF.
In addition, the accident prevention rules and regulation applicable at the location of
use are to be observed.
The safety precautions listed herein are limited solely to using the MRF.
The MRF has been designed and constructed in accordance with the current state
of the art and recognized safety regulations. Nevertheless, hazards may be posed
to the life and limb of the individual using the product or to third parties. Risk of
damage may be posed to the product or other equipment and property.
The MRF is only to be used as follows:
solely for its designated use
only when in a safe, perfect condition
Immediately remedy any malfunctions that might impair safety.
Our General Terms and Conditions apply. Our General Terms and Conditions apply.
They are made available to the owner upon concluding purchase of the unit at the
latest. Any and all warranty and liability claims for personal injuries and damage to
property shall be excluded in the event they are attributable to one or more of the
following causes: Any and all warranty and liability claims for personal injuries and
damage to property shall be excluded in the event they are attributable to one or
more of the following causes:
improper use of the MRF or use deviating from its designated use
improper assembly, installation, commissioning, operation and maintenance of
the MRF
operating the MRF when the system equipment or systems are defective
modifications to the MRF made by the user or purchaser
Improper monitoring of unit components that are subject to wear and tear
improperly performed repair work
