3 | Overview
HYDAC FILTER SYSTEMS GMBH
18 / 64
BeWa CTM-EF3x3x 4436386 en-us lq
3.2 Proper/designated use
Use the unit only for the application described in the following.
The ContaminationTest Module CTM-E… is the extraction module that can only
be used together with a CTM-SC… supply module of the same series. The
analysis of components and systems with regard to their technical cleanliness is
based on the
(
and ISO 18413).
Quality standards can be checked and documented by means of a microscopic
and gravimetric analysis of the type, size and quantity of the contamination, and
the necessary optimization measures can be implemented.
Claims for defects or liability, regardless of the legal foundation, do not apply
with incorrect or improper installation, commissioning, usage, handling, storage,
maintenance, repair, use of unsuitable components or other circumstances for
which the manufacturer is not responsible.
The manufacturer assumes no responsibility for determining the interfaces for
installation in a system or the installation, use or functionality of the product in
this system.
The intended use of the product extends to the following:
– Operation only together with the ContaminationTest Module CTM-SC 3xxx.
– Follow all the notices contained in the operating instructions.
– Operation only with mounted cover panels.
– Not operating unless the analysis chamber is closed.
– Complying with the requirements for repair and maintenance work.
– Operation under supervision.
– Operation only in closed rooms, environmental cleanliness and air similar to
that under laboratory conditions.
– Horizontal installation surface
– The immobilization brakes on all the rollers have been set.
– Minimum distance to the wall at the rear ≥ 5 cm
– Adequate ventilation in the room.
