Hyd-Mech M-16A PLC 100 E200 Скачать руководство пользователя

Страница: 221 / 222

9.1

WARRANTY

Hyd-Mech Group Limited warrants each new M-16/20 bandsaw to be free from failure resulting from defective mate-

rial and workmanship under proper use and service for a period of two years following the date of shipment to the user.

Hyd·Mech’s sole obligation under this warranty is limited to the repair or replacement without charge, at Hyd·Mech’s

factory, warehouse, or approved repair shop any part or parts which Hyd·Mech’s inspection shall disclose to be defective.

Return freight must be prepaid by the user.

This warranty, in its entirety, does not cover maintenance items, including but not limited to lubricating grease and oils, fil-

ters, V-belts, saw blades, etc., nor any items therein which show signs of neglect, overloading, abuse, accident, inadequate

maintenance, or unauthorized altering.

MOTOR, GEARBOX, PUMP, ELECTRIC COMPONENTS, VALVES, HOSES, FITTINGS, and any other items used in the

manufacture of the M-16/20, but not originally manufactured by Hyd·Mech are subject to the original manufacturer’s war-

ranty. Hyd·Mech will provide such assistance and information as is necessary and available to facilitate the user’s claim to

such other manufacturer.

Liability or obligation on the part of Hyd·Mech for damages, whether general, special or for negligence and expressly includ-

ing any incidental and consequential damages is hereby disclaimed. Hyd·Mech’s obligation to repair or replace shall be the

limit of its liability under this warranty and the sole and exclusive right and remedy of the user.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR

IMPLIED, WRITTEN OR ORAL, INCLUDING WITHOUT LIMITATION ANY IMPLIEDWARRANTIES OF MERCHANT-

ABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

This warranty may not be changed, altered, or modified in any way except in writing by Hyd-Mech

Group Limited

HYD·MECH GROUP LIMITED

1079 Parkinson Road

P.O. BOX 1030

Woodstock, Ontario

N4S 8P6

Phone: (519) 539-6341

Fax: (519) 539-5126

Toll Free (877) 276-SAWS (7297)

E-mail, [email protected]

Содержание M-16A PLC 100 E200































































































































































































































Результаты поиска

Содержание M-16A PLC 100 E200

Отзывы:

Похожие инструкции для M-16A PLC 100 E200

Бренды по названию

Популярные бренды

Hyd-Mech M-16A PLC 100 E200, Руководство пользователя

Результаты поиска

Содержание M-16A PLC 100 E200

Отзывы:

Похожие инструкции для M-16A PLC 100 E200

Бренды по названию

Популярные бренды