HY17M24 Series
IDE Hardware User’s Manual
© 2019 HYCON Technology Corp
www.hycontek.com
Preliminary
APD-HY17MIDE002-V01_EN
page10
(6) J7
Feature: Target Board Chip’s SPI interface (implemented with firmware) port, The main
purpose is to be able to connect to the ENOB tool's control board SPI for use as an
ENOB demo board.
Description: Pin are defined as follows
Pin
Name
Description
1-1
VDD
Target Board chip ‘s Power Pin
2-2
SDI
Target Board chip ‘s SDI Pin
3-3
SCK
Target Board chip ‘s SCK Pin
4-4
SDO
Target Board chip ‘s SDO Pin
5-5
CS
Target Board chip ‘s CS Pin
6-6
VSS
Power Ground pin
(7) J8
Feature:
Target Board Chip’s I
2
C interface port.
Description: Pin are defined as follows
Pin
Name
Description
1-1
VSS
Power ground pin
2-2
VDD
Target Board Chip’s VDD power
3-3
SCL
I
2
C’s clock pin
4-4
SDA
I
2
C’s data
pin
(8) J9
Feature:
Target Board Chip’s UART interface port.
Description: Pin are defined as follows
Pin
Name
Description
1-1
VDD
Power ground pin
2-2
VSS
Target Board Chip’s VDD power
3-3
RC
UART’s receive pin
4-4
TX
UART’s transform
pin
Note
：
The above only describes the basic functions that the Target Board will use, for other
unlisted parts, please refer to the circuit diagram or contact FAE technical support.
.
