3
A submersible pump not in use should always be kept in a safe and dry place.
Always use hoses, couplings and spares as such recommend by HYCON A/S.
Always mount the hoses correctly, so that the pump runs the right way. If the
pump runs the wrong way there is a risk of defects that are not covered by
warranty.
Repairs may only be carried out by experienced personnel.
Make sure that all couplings are cleaned before connection.
Always disconnect the hydraulic circuit before connecting or disconnecting the
pump. If this is not done, there is a risk of damage to the quick release couplings
or the motor or the hydraulic system getting superheated.
Oil Flow and Pressure
Your new HYCON submersible pump is designed for a certain oil flow, working pres-
sure and maximum pressure. A too high oil flow and/or a too high pressure results in
overload of the pump, meaning that the lifetime of your new HYCON tool will not be
as expected, and that your service and repair costs will be too high.
It is important to check that the pump is not supplied with an oil flow beyond its de-
sign capacity, that the working pressure is correct and that the maximum allowed
pressure is not exceeded.
On page 6 you will find the technical data, and on page 8 there is a guide to connec-
tion to hydraulic power sources and how to ensure that the submersible pump is not
overloaded.
IMPORTANT