3. Operation
The hand dryer has a number of parameters that can be fixed on installation. To access
the controls open the panel located on the left hand upper corner of the heater.
The hand dryer can operate at two power outputs:
•
Element off 800W
•
Element on 1900W
Auto heating
When selected, the heating element will only operate when the room
temperature is below 25
0
C.
All time heating
The heating element will always operate.
Cool
The heating element will never operate.
Hot
The heating element will be enabled when selected (Auto heating mode
1 will still disable the heating element based on room temperature if selected).
Power On/Off
Turn On/Off the hand dryer.
7
1
2
3
4
5
1
5
2
3
4
COOL
AUTO HEATING
HOT
ALL TIME HEATING
ON
OFF
POWER
6
JETB190Wnew.qxp_Layout 1 12/04/2016 14:07 Page 7
