3. Operation
Fully uncoil the power cord before plugging the heater in
Choose from three heat settings:
•
Fan only (cool)
•
1.0kW (half power)
•
2.0kW (full power)
Select the maximum heat setting from the thermostat dial. Once the desired room
temperature is achieved adjust the dial down until a click is heard and the element
light goes off. This will now maintain the current room temperature.
Safety cut-out
In the event of a safety cut-out operation, the heater will blow cold air until the
temperature drops low enough for the thermal cut-out to close once again. The cause
of the overheating should be established before continuing to use the heater.
4
FH-201Z_Layout 1 08/06/2015 16:00 Page 4
